December 04, 2018
Trailer Parts to Secure your Cargo when Hauling
Securing your cargo when hauling/trailering is often a requirement through many municipalities and within city limits. Keeping your cargo safe and secure ensures that it arrives at your destination with you, not scattered on a highway or gravel road leaving a problem for you to deal with. National Trailer Parts carries a wide assortment of products that can be built into the design of new trailers by manufacturers or retrofitted to improve the usefulness of existing trailers. We are providing descriptions below of some of our most popular items to help you select what best fits your needs. Many of these items are originally intended for flat deck trailers but can also be used inside enclosed trailers or with dump trailers.
We have included the National Trailer Parts part number in the descriptions below for easy reference.
48313 – CHAIN LOAD BINDER FOR 5/16", 3/8" CHAIN
Lever-style chain binders are made from forged steel for securing loads in chain binding applications. For use on flatbed trailers. For use with either 5/16" or 3/8" chains.
52003 - CHAIN-LOAD BINDER 19K FOR 3/8", G43 RATCHET TYPE
Ratchet style chain binder requires less effort to attach and remove from loads. Drop forged and heat treated. For use with 3/8” chains.
802HD-27F – 2" RATCHET STRAP ASSEMBLY 27' OVERALL LENGTH 10,000 LB CAPACITY
Kinedyne ratchet straps with metal loop hooks on both ends are intended for use with flatbed trailer tie-down requirements. The ratchet straps are labeled with their working load limit of 10,000 lbs (4535 kg) to meet DOT regulations, WSTDA, and CHP standards.
1820 – 4" WINCH FOR STANDARD 4" STRAPS, FIXED TYPE
For use with 4” winch strap on flatbed trailers. The strap is fastened on the opposite side of the trailer, positioned over the cargo, and then fed through the slot in the winch shaft before being tightened. This fixed type winch is for welding to the flatbed trailer.
4821XW-27F - 4" WIDE 27 FT STRAP W/FLAT HOOK ON ONE END, 15.000LB CAP
These rugged straps are for use with a trailer mounted winch fastened to one side of a flatbed trailer and hooked into the frame on the opposite side. All winch straps are labeled to meet CHP standards, DOT regulations and WSTDA recommended standards. All winch straps are made from resin-coated polyester for minimum stretch and maximum wear resistance.
ET4310 - CARGO CONTROL, E TRACK 10', HORIZONTAL STYLE
The E Track can be used in conjunction with E Track Ratchet Straps and Cam Straps as well as Rope Tie Offs, Spring E Fittings with D-Rings and shoring/decking beams for a variety of tie down applications.
The horizontal E Track slots run perpendicular to the E Track rail and can be mounted on the floor or bed of a trailer as well as on the walls of enclosed trailers. The slots in horizontal e-track rails provide evenly spaced tie down points for cars, ATVs, snowmobiles, motorcycles and cargo on pallets. When mounted on the bed of a trailer horizontal E Track rails provide numerous anchor points for axle straps, d-rings and rope tie off points. E Track installed on the walls of a trailer provides anchor points for cargo nets and rope tie-offs to secure equipment, spare tires or to hold objects flat against the sides of trailer walls.
ET8264 - CARGO CONTROL E TRACK 1" RING, 2K HEAVY DUTY
The E Track ring quickly creates tie-down points by securely snapping into the slots of the E Track.
The 1,000 lb safe working load can be used and connected to hook straps, ropes or cable to E-tracks. The 1” circular ring fits many hooks and clamps. Simply insert the lower portion at an angle into the E track slot then rotate into locking position.
ET8301 – CARGO CONTROL E-TRACK 2" D-RING, 2K HEAVY DUTY
The E Track D-ring quickly creates tie-down points by securely snapping into the slots of the E Track.
The 2,000 lb safe working load can be used in heavier tie down applications. The 2” D-shaped ring is designed for use with E Track straps but can also be used with most hooks, ropes and clamps. Simply insert the lower portion at an angle into the E track slot then rotate into locking position.
ET6412 – CARGO CONTROL, E-TRACK STRAP, 2"X12" W/RATCHET, 3K MBS 1K WALL
The E Track strap is designed for use with the E Track cargo control strips, either mounted to the wall of a trailer or the bed of a trailer. Snap into the E Track slots and then use the winch to securely fasten.
MWCC - MOTORCYCLE WHEEL CHOCK CHROME, 6.5"
Tubular construction makes this wheel chock strong and durable. Features keyhole slots so wheel chock can be removed or easily put ack into place. Stabilizes up to 6.5″ tires. Chrome plated for a durable corrosion resistant finish. Helps to stabilize the font or rear of a motorcycle to be transported either on a flatbed trailer or inside an enclosed trailer.
TT4200 – TURBO-TARP ROLLER ASSY FOR TRAILERS UP TO 101" WIDE
This is the hardware portion of the Universal tarping system, including hand crank, most suited for use with dump trailers. This system allows for convenient and quick tarping of loads. The roller assembly can be either welded on or bolted on and can fit trailers up to 104” wide. Once installed on your trailer, the end of the tarp is slid into the spline groove for secure attachment. Can be used with either a solid or a mesh tarp.
TT-MESH-80X14 - MESH TARP FOR TURBO-TARP 80" WIDE X 14 FT LONG
For use with the Turbo-Tarp roller assembly. Industrial Grade Heavy-Duty Black PVC Coated Polyester Mesh Material. Insert the tarp in to the roller assembly shaft groove and then crank tightened. Intended helping to contain rock, gravel, and debris. All weather material.
Categories: Trailer Tip